Installation of inner/outer spine+angle steel and side sealing edge
In building construction, the installation of inner/outer ridges, angle steels, and side sealing edges is an important step to ensure the safety, sealing, and beauty of the structure. The following are the installation steps and precautions for these components.
Installation of inner/outer ridges
1. Determine the position: Mark the position of the ridge according to the design drawings and ensure that it is aligned with the roof structure.
2. Install the ridge board: Place the ridge board at the highest point of the roof and ensure that it is level. Fix the ridge board to the roof structure with bolts or rivets to ensure a secure connection.
3. Sealing treatment: Apply sealant to the joints of the ridge board to ensure waterproof performance and prevent moisture from penetrating.
Installation of angle steel
1. Confirm the position of the angle steel: According to the design requirements, determine the installation position of the angle steel, which is usually located at the junction of the roof and the wall.
2. Install the angle steel: Place the angle steel in the specified position and use an electric screwdriver or welding equipment to fix the angle steel to the roof and wall. Make sure that the angle steel is installed vertically and firmly.
3. Sealing treatment: Apply sealant to the joints of the angle steel to ensure water tightness.
Installation of side seal edges
1. Determine the side seal location: According to the design requirements, determine the installation location of the side seal material, which is usually located at the intersection of the roof edge and the wall or other components.
2. Install the side seal material: Press the side seal material (such as foam strips or sealant) against the edge to ensure it fits tightly.
3. Strengthen the seal: Apply sealant to the edge of the side seal material to ensure a good seal and prevent moisture from entering.
Complete inspection
Check all connection points and seams to ensure that they are firm and not loose. Confirm that all seals are in place to ensure good waterproof performance.
Precautions
Safety protection: When working at heights, make sure to use safety belts and other protective equipment to ensure personal safety.
Weather conditions: Try to install in good weather to avoid affecting the quality of construction.
Professional guidance: If you are unsure, it is recommended to consult a professional to ensure the quality of installation.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
